Contact for a price
PEGAS 360 x 500 SHI-LR
{{ galleryProps.activeIndex + 1 }}/1
Description
Semiautomatic machine with hydraulic manipulation.
The machine is designed for cutting of material in vertical and angle cuts, angle cuts are possible to set fluently from 0 to 60 grades to the right and from 0 to 60 grades to the left. Change of angle using quick clamping handle.
It is suitable for piece production and small series production. Thanks to its rugged construction it enables cutting of wide range of profiles and full materials.
…
Semiautomatic machine with hydraulic manipulation.
The machine is designed for cutting of material in vertical and angle cuts, angle cuts are possible to set fluently from 0 to 60 grades to the right and from 0 to 60 grades to the left. Change of angle using quick clamping handle.
It is suitable for piece production and small series production. Thanks to its rugged construction it enables cutting of wide range of profiles and full materials.
NOVELTY: control system designed with focus to easy handling.
Control panel MITSUBISHI as standard equipment. It uses touch display and PLC, which enable semi-automatic cutting (basic setting included) as well as communication with operator.
New functions:
– auto stop of hydraulic unit
– cutting times measuring
– list of error messages
– supporting message for machine start without necessity to learn the manual
– mode of arm moving after end of the cut
automatic diagnostic of inputs and outputs
Construction:
The Controller with PLC MITSUBISHI. Controller show lot of information about cutting proces on the display. Time of the cut, amperes, speed of the blade ….
Saw is equipped with electronical regulation of down shift – BRP.
The machine is constructionaly designed in that way, so that it corresponds to extreme exertions in productive conditions.
The Frame is provides the necessary performance and accuracy of cutting.
The Frame is situated in pre-tightened slide bushes with a teflon friction surface.
The drive and tensioning pulleys are cast pieces.
The down working position of the Frame controlled by the microswitch. The upper working position of the Frame is controlled by induction sensor. In the end position microswitch is on, Frame goes to selected up position.
The vice is made of cast iron and the jaws allow a safe grip. The hydraulically controlled vice with short travel is situated in an adjustable dovetail groove. The adjustment is manual with a wheel and trapeze thread. Basic part of the vice moves according to the direction of the angle cut setting, fixation is made by the handle.
The turntable is a robust weldment situated on tapered roller bearings. The position of the turntable is fixed by the handle –
The position of the turntable for vertical cutting is arrested automatically by the spring mechanism. General angles are adjusted by the nonius.
Leading of blade in hard-metal plates.
The sawing machine is equipped with an electromechanical device, which monitors the band tension and a limit switch, which secures the machine against slack band.
The saw-band is equipped by a guard, which protects the operator from millings and cutting emulsion.
Mechanic tightening of the blade.
The cleaning brush for perfect cleaning and function of blade.
Drive of machine is solved by worm gear box with maintenanceless oil filling. Three-phases electromotor with double winding, with a frequency converter for a fluent regulation of the blade speed from 20 to 100 m/min. Sturdy flange with shaft. Termoprotection of engine.
The cooling system distributes cutting emulsion to the band guides.
Robust base with a tank for chips.
Indication of blade tightening and opening of the cover
Controlling 24 V
The control panel is equipped with a safety button, which stops the saw. There is also a feed regulator and buttons, which control the various available movements.
Machine is equipped by hydraulic system that manipulates all functions of that maschine. It presses the Frame to cut, pulls up the Frame and opens and closes vices.
Contact for a price
Manufacturer:
Pegas
Model:
SHI-LR
Category:
Bandsaws
Offer ID #23643
Send message
Related listings
We Specialise in buying and selling in all types of Plate & Section Bending Rolls. Guillotine Shears. Press Brakes. Saws. CNC Lasers. CNC Punches. Steelworkers. Lathes. Millers. Grinders Plus much more...
Copyright © 2023. All rights reserved.